碳纤维表面特性对反硝化菌固着化的影响

通过对比反硝化菌在不同基体碳纤维表面的固着化及碳纤维表面含氧官能团对菌种的固着化实验,研究了碳纤维(基体、比表面积、循环利用性等)特性,尤其表面含氧官能团对反硝化菌固着化的影响。实验结果表明,反硝化菌在PAN基碳纤维上的平均挂膜厚度明显高于沥青基和粘胶基碳纤维。碳纤维表面适量的含氧官能团有助于较多、较牢固地固着反硝化菌。对三种PAN基碳纤维的XPS谱图分析表明碳纤维表面含氧官能团—O—CO对反硝化菌的固着化影响较大,当碳纤维表面含氧官能团—O—CO中碳原子占表面碳原子总量的3%左右时反硝化菌固着化效果较佳。经过比较表明PAN基碳纤维是一种生物相容性好、固着化程度高、再生能力强、耐微生物分解及化学腐蚀的优异的新型反硝化菌固着化载体。     

膜分离活性污泥法在食品工业废水处理中的应用

以处理食品加工厂的生产废水为例，介绍了膜分离活性污泥法的特点：污泥负荷大、出水水质稳定、生化反应速率快、占地面积少、维护管理简便等；同时还介绍了中空纤维膜的维护管理方法。     

新型钢-砼组合结构构件的研究与应用

在工程设计和施工中，对钢管砼及型钢砼-钢筋砼组合的结构提出了许多问题．据此，对这种新型钢-混凝土组合结构构件进行了一系列的试验研究及工程应用．本文是对近8年来研究工作的归纳、总结．其中，提出的较优化的钢筋砼环梁节点、钢加强环节点、钢管砼柱与钢筋砼柱节点、钢骨砼柱与钢筋砼梁节点、钢骨砼柱与组合梁节点及组合梁设计方法、预应力叠层空腹桁架等，都已应用于实际高层建筑中．文中提出的建议，可供工程设计参考使用．     

纤维网片复合方式对纤维增强水泥基材料性能的影响

在分析渍浆纤维混凝土(SIFCON)和渍浆网片混凝土(SIMCON)各自优缺点的基础上，研究了不同性质乱向短纤维和定向纤维网片复合及不同性质网片组合方式对纤维增强混凝土性能的影响．实验结果表明：各种纤维体积分数下定向网片与乱向短纤维复合增强混凝土各项性能明显优于单用乱向短钢纤维增强混凝土；当纤维总体积分数为8％时，由2层细孔编织钢丝网和3层细孔玻纤网组合网片型式B(网片体积分数为0．7％)与乱向短纤维(体积分数为7．3％)复合增强混凝土，其抗弯强度、抗剪强度、弯曲韧性(I5)比短切钢纤维增强混凝土(SIFCON)分别提高了45％，25％和46％，从而揭示了高弹模与低弹模纤维复合、乱向纤维与定向纤维网复合，优化纤维分布和取向，使其在材料层次和结构层次协同作用的优势得以发挥，并以较低的成本和较方便的施工工艺制备了高性能纤维增强水泥基复合材料。     

Technical Breakthroughs in the Construction of TGP

1Introduction　TheThreeGorgesProject(TGP)isavitalbackboneprojectinthedevelopingandharnessingoftheYangtzeRiver.Asamulti purposehydro developmentprojectthatcanproducecomprehensivebenefitsmainlyinfloodcontrol,powergenerationandnavigationimprovement,TGPwillexertasignificantimpactonthenationalsocio economicdevelopmentofChinaafteritscompletion .Withthenormalpoollevel (NPL)at1 75m ,thereservoirhasatotalstoragecapacityof39 3billionm3 .Theprojectiscom posedofadam ,twopowerplantsandnavigationfacil…     

金属基体表面热熔敷玻璃涂层耐蚀性研究

利用斑点试验、点蚀试验、电化学测试及扫描电镜等方法 ,研究了熔敷温度、保温时间和稀土添加量等工艺参数对热熔敷法制备的玻璃涂层耐蚀性的影响 ,探讨了添加稀土提高玻璃涂层耐蚀性的机理。试验结果表明 ,采用热熔敷法制备的玻璃涂层有较好的耐蚀性。随着熔敷温度的提高和保温时间的延长 ,形成了一定量的晶相后会降低涂层的耐蚀性。试验结果表明 ,熔敷温度为 70 0℃、保温 5min后能够得到耐蚀性良好的玻璃涂层。添加稀土提高了釉料的软化温度和熔融釉料的粘度 ,阻止了结晶形核和晶核长大 ,减少了晶相 ,同时提高了涂层的电极电位 ,使涂层耐蚀性显著提高。当稀土含量为 2 %时 ,涂层的耐蚀性较好。     

Implementation of the finite deformation plastic theory-Tensor derivative and metal forging simulation

It has been shown that the traditional small deformation plasticity can be transplanted to the finite deformation plasticity by using the logarithmic strain measure only. In this way, the mathematical problem of how to find the derivative of a tensor function arises. In this paper, a general method for finding the derivative of a tensor function is proposed. Several metal forging examples are given.During the calculation, the mesh regeneration is not even invoked.     

一种薄壁矩形管弯曲胎具的设计

介绍了一种薄壁矩形管弯曲胎具。利用金属材料弯曲变形时的塑变硬化特性来弯曲矩形管,较好地解决了雨阳棚骨架现场弯曲加工的问题。     

Emergent Property in Macromolecular Motion

In this paper, the model of inverse cascade fractal super-blocks along one direction (in the positive or negative) in the 3-dimensional space is developed to describe the self-similar motion in macromolecular system. Microscopically the cohesive and dispersed states of the motion blocks are co- existent states with vastly different probability of occurrence. Experimental results and theoretical analysis show that the microscopic cohesive state energy and dispersed state energy of each motion block are respectively equal to the macroscopic glassy state energy kTg and molten state energy kTm of the system. This singularity unveils topologically the non-integrability, mathematically the anholonomy, and macroscopically the emergent property. This singularity also reveals that the glass, viscoelastic and melt states are three distinct emergent properties of macromolecular motion from a macroscopic viewpoint. The fractal concept of excluded volume is introduced to depict the random motion at various scales in     

Structural Changes of Polyethylene Terephthalate Fibers Grafted by Acrylamide

A group of grafted PET fibers with different graft yield are formed by grafting acrylamide onto the PET main chains. The structure of grafted fibers are studied by scanning electronic microscope ( SEM ), infra-red spectrophotometer ( IR ), and differential scanning calorimetry(DSC). At the same time, the moisture regain, dyeability, strength, and elongation at break of the samples are measured and their relations with structural changes are discussed. Compared with ungrafted fiber, shape of the fiber cross-section, IR characteristic absorption peaks, and melting behavior of the grafted fibers have been changed, causing the fiber dyeability and moisture regain to be increased, and mechanical properties to be changed.